Description :
MOTOR-ON is a heavy-duty degreaser for engines, tools, machinery and floors.
Applications :
MOTOR-ON is a powerful and effective way to remove heavy impacted grease and oil deposits from engines in cars, trucks, boats and machinery.
Advantages :
- Fast acting. MOTOR-ON cuts through grease and grime on engines, tools, machinery and floors thus saving time and labor.
- Versatile. MOTOR-ON can be safely used on plastics, rubber, paint and most other surfaces.
- Easy application. With MOTOR-ON just apply and hose off. There is no need for special and expensive equipment.
- Safe to use. MOTOR-ON is non-caustic, non-alkaline and does not emit toxic fumes. Harmless to metal, painted surfaces and normal skin.
- Economical. MOTOR-ON can be diluted up to 10 times without losing its effectiveness.
- Environmental friendly. MOTOR-ON aerosol packing is CFC-free.
Instructions :
Engine and chassis cleaning. For average work, mix MOTOR-ON with 8 parts of mineral spirits or
kerosene. For light cleaning, mix 1 to 10 parts. For heavy cleaning mix 1 to 5 parts. Spray or brush
mixture over equipment to be cleaned. If dirt is heavily encrusted, use a stiff brush to work on surface. Let soak for 10 to 15 minutes for complete penetration, then flush thoroughly (with water, if applicable).
Dip tank cleaning. Mix MOTOR-ON to 8 parts kerosene in the tank. Soak parts in the tank for 30 minutes to 2 hours as necessary. After cleaning, flush thoroughly (with water, if applicable).
Industrial equipment and machinery cleaning. For average conditions, mix MOTOR-ON with 8 parts of kerosene or mineral spirit. For light cleaning, mix 1 part to 20 - 30 parts of water. For heavy build-up, 1 part to 6 parts water. Use warm water for better effectiveness. Spray or brush mixture over equipment to be cleaned. Use a soft brush on areas where dirt is heavily encrusted.
Let soak for 15 to 20 minutes, then flush thoroughly (with water, if applicable).
Cars, trucks, and buses washing. Use one part MOTOR-ON to six parts kerosene for heavily encrusted areas. Can be applied by spraying or use of long handled, soft brush. Then rinse off with water.
To remove oil stains from concrete floor. Mix 1 part MOTOR-ON to 8 parts kerosene. Brush into areas stained. Stand for 5 mins, rinse off with water.
Properties :
TYPE : Solvent emulsifier.
FLAMMABILITY : Combustible.
TOXICITY : Harmful, may be fatal if swallowed.
COMPOSITION : Biodegradable emulsifiers, penetrants, aliphatic solvents and terpenes.
