Description :
INSULATING VARNISH (CLASS ‘H’) is a solvented modified isophthalic varnish with long term tank stability and a thermal rating of 1800C . Has excellent penetration and combines flexibility with high bond strength capabilities.
Applications : An ideal impregnant for all kinds of stators, armatures, and transformers where excellent surface finish quality is required. Is compatible with most types of insulation products and systems.
Advantages :
- Excellent penetration combined with flexibility.
- Excellent cure characteristic, and bond strength.
- Excellent chemical and water resistance.
- High flash point : 340C
- Thermal index of 1800C (Class H)
- Environmental friendly. Aerosol packing is CFC-free.
- INSULATING VARNISH (CLASS ‘H’) is suitable for impregnation using components are ambient temperature or pre-heated. If components are pre-heated, precaution should be taken to ensure that the varnish is not exposed to temperature above 40oC. This will ensure excellent penetration whilst minimizing solvent loss from the tank.
- Development of bond strength is a function of both curing temperature and time. Relatively low curing temperature of 130-1400C at duration of approximately 4 – 6 hours may be sufficient if bond strength is not of prime importance e.g. in small transformers and fractional h.p. motors.
Properties :
VISCOSITY (BS 3900 Type B4 Flow Cup) 135 – 165 seconds@ 210C
NON-VOLATILE (as supplied) 48 – 52%
SPECIFIC GRAVITY @ 210C 0.94 – 1.00
FLASH POINT (Abel Closed Cup) 340C
APPEARANCE Clear Brown Amber
No comments:
Post a Comment