refinishing and provides controlled chemical action to protect further corrosion and rusting.
Applications : DE-RUST s widely used in any industry where the effects of corrosion deteriorate the
equipment life, appearance and efficiency. Use on equipment such as all metal, tanks, machineries,
pipes, cooling towers, etc.
Advantages :
- Four-in-one action. DE-RUST removes corrosion, degreases, etches and phosphatizes for corrosion/rusting protection. This saves money and labour.
- Highly effective formulation. DE-RUST penetrants cut deeply into grease and contaminations without pre-cleaning. DE-RUST renovates and conditions metal surfaces for refinishing.
- Economical. DE-RUST high concentration can be diluted to 3 parts of water for dipping.
- Clinging power. DE-RUST cling-on formulation ensures maximum effectiveness on vertical surfaces.
- Safe on most metals. DE-RUST is completely safe for use on steel and aluminium.
- Non-fuming and non-flammable. DE-RUST is easy and safe to use.
Instructions :
For heavy rust :
1. Remove loose, excess flaking corroded material and dirt.
2. Spray or swab a generous coating of DE-RUST over the area to be treated.
3. Let stand for 2 minutes to several hours depending on the severity of corrosion buildup.
4. Rinse off and repeat application if rust deposits are extremely heavy.
For light rust :
1. Dilute 1 part DE-RUST to 3 parts of water.
2. Allow 2 to 20 minutes for DE-RUST to penetrate and react to surface.
3. Rinse off and let dry.
For dip tank application :
1. Dilute 1 part DE-RUST to 3 parts of water in a plastic or plastic-lined dip tank.
2. Dip tank must be closed tightly when not in use. For corroded vertical surfaces, apply a heavy coating and allow longer time for total reaction.
NOTE: If an unpainted corrosion resistant surface is desired, wipe off excessive DE-RUST and allow to
dry. If the surface is to be painted, rinse off all DE-RUST residue and dissolved solids and dry thoroughly
before painting.
Properties :
TYPE : Nonfuming acidic rust remover.
FLAMMABILITY : Non-Flammable.
TOXICITY : Harmful, if swallowed.
BOILING POINT : 90ºc
COMPOSITION : A combination of penetrants, organic solvents and nonfuming acidic rust removers
